Glanda Kabloya Metal a li dijî teqînê (Metric/PG/NPT/G Mijara)
Glanda Kabloya Metal a li dijî teqînê (Metric/PG/NPT/G Mijara)
Pêşkêş
Glandên kabloyê bi giranî ji bo kişandin, rastkirin, parastina kabloyan ji av û tozê têne bikar anîn. Ew bi berfirehî li qadên wekî panelên kontrolê, alav, ronî, alavên mekanîkî, trên, motor, proje hwd têne sepandin.Em dikarin girêkên kabloyên metal ên ku ji tûncê nîkel hatî çêkirin (Numreya fermanê: HSM-EX) û pola zengarnegir (Jimara fermanê: HSMS-EX) ji we re peyda bikin.
| Mal: | Laş: tûncê nikelkirî; morkirin: polyamide; morkirin: lastîk guherî |
| Rêjeya Germahiya: | Min -40℃,Herî zêde 100℃,Dem kurt 120℃ |
| Dereceya parastinê: | IP68 (IEC60529) bi zengila O-ya minasib di nav rêza dorpêçkirinê ya diyarkirî de |
| Taybetmendî: | Berxwedana lerizîn û bandorê, li gorî IEC-60077-1999. |
| Serlêdan: | Avahiya makîneyê, alavên elektrîkê, dolaba kontrola elektrîkê |
| Sertîfîka: | CE, RoHS, Exe II Gb, IECEx, ATEX. |
Specification
(Ji kerema xwe ji bo bêtir agahdarî bi me re têkilî daynin heke hûn hewceyê pîvanên din ên ku di navnîşa jêrîn de ne hene.)
| Gûla kabloya tûncê ya bi nîkel-pêla teqînê (Têra metrîk) | |||||||
| Gotar no. | Dezî | Mezinahiya qulikê | AG | GL | H | SW1/SW2 | Packet |
| Ebat | mm | mm | mm | mm | mm | yekîneyên | |
| HSM-EX-M12 | M12×1.5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-EX-M16-H | M16×1.5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-EX-M16 | M16×1.5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-EX-M16-D | M16×1.5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 32 |
| HSM-EX-M18 | M18×1.5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-EX-M20-H | M20×1.5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-EX-M20 | M20×1.5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-EX-M20-D | M20×1.5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-EX-M22 | M22×1.5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-EX-M24-H | M24×1.5 | 6~12 | 24 | 7 | 23.5 | 24/27 | 18 |
| HSM-EX-M24 | M24×1.5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-EX-M25-H | M25×1.5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-EX-M25 | M25×1.5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-EX-M25-D | M25×1.5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-EX-M27-H | M27×2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-EX-M27 | M27×2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-EX-M30-H | M30×2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM-EX-M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-EX-M32-H | M32×1.5 | 13~18 | 32 | 8 | 26 | 30/36 | 8 |
| HSM-EX-M32 | M32×1.5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-EX-M32-D | M32×1.5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM-EX-M33 | M33×2.0 | 18~25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-EX-M36-H | M36×2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM-EX-M36 | M36×2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-EX-M40-H | M40×1.5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-EX-M40 | M40×1.5 | 22~30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-EX-M40-D | M40×1.5 | 22~32 | 40 | 9 | 38.5 | 50/50 | 4 |
| HSM-EX-M42 | M42×2.0 | 22~32 | 42 | 9 | 38.5 | 50/50 | 4 |
| HSM-EX-M48 | M48×2.0 | 22~32 | 48 | 9 | 38.5 | 50/52 | 4 |
| HSM-EX-M50 | M50×1.5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-EX-M56 | M56×2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 2 |
| HSM-EX-M60 | M60×2.0 | 37~44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-EX-M63 | M63×1.5 | 37~44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-EX-M63-D | M63×1.5 | 42~53 | 63 | 10 | 44.5 | 75/75 | 2 |
| HSM-EX-M64 | M64×2.0 | 37~44 | 64 | 10 | 41 | 65/70 | 2 |
| Gûla kabloya tûncê ya bi nîkel-pêla teqînê (mijara PG) | |||||||
| Gotar no. | Dezî | Mezinahiya qulikê | AG | GL | H | SW1/SW2 | Packet |
| Ebat | mm | mm | mm | mm | mm | yekîneyên | |
| HSM-EX-P07 | PG7 | 3~6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-EX-P09-H | PG9 | 3~6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| HSM-EX-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-EX-P11 | PG11 | 5~10 | 18.6 | 7 | 22.5 | 20/22 | 75 |
| HSM-EX-P13.5-H | PG13.5 | 5~10 | 20.4 | 7 | 22.5 | 22/22 | 32 |
| HSM-EX-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-EX-P16-H | PG16 | 6~12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| HSM-EX-P16 | PG16 | 8~14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-EX-P21-H | PG21 | 10~16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| HSM-EX-P21 | PG21 | 13~18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-EX-P29-H | PG29 | 15~22 | 37 | 8 | 28 | 36/40 | 8 |
| HSM-EX-P29 | PG29 | 18~25 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-EX-P36 | PG36 | 22~32 | 47 | 9 | 38.5 | 50/50 | 4 |
| HSM-EX-P42 | PG42 | 30~38 | 54 | 9 | 40 | 58/58 | 2 |
| HSM-EX-P48 | PG48 | 37~44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Gûla kabloya tûncê ya bi nîkel-pêla teqînê (mijara PG: Mijara dirêjkirî) | |||||||
| Gotar no. | Dezî | Mezinahiya qulikê | AG | GL | H | SW1/SW2 | Packet |
| Ebat | mm | mm | mm | mm | mm | yekîneyên | |
| HSM-EX-P07-L | PG7 | 3~6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| HSM-EX-P09-HL | PG9 | 3~6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-EX-P09-L | PG9 | 4~8 | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-EX-P11-L | PG11 | 5~10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-EX-P13.5-HL | PG13.5 | 5~10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-EX-P13.5-L | PG13.5 | 6~12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| HSM-EX-P16-HL | PG16 | 6~12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-EX-P16-L | PG16 | 8~14 | 22.5 | 10 | 23 | 24/24 | 32 |
| HSM-EX-P21-HL | PG21 | 10~16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-EX-P21-L | PG21 | 13~18 | 28.3 | 12 | 26 | 30/30 | 18 |
| HSM-EX-P29-HL | PG29 | 15~22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-EX-P29-L | PG29 | 18~25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-EX-P36-L | PG36 | 22~32 | 47 | 15 | 38.5 | 50/50 | 2 |
| HSM-EX-P42-L | PG42 | 30~38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-EX-P48-L | PG48 | 37~44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Gûla kabloya tûncê ya bi nîkel-pêçayî ya teqemenî (G Mijara) | |||||||
| Gotar no. | Dezî | Mezinahiya qulikê | AG | GL | H | SW1/SW2 | Packet |
| Ebat | mm | mm | mm | mm | mm | yekîneyên | |
| HSM-EX-G3/8 | G3/8″ | 4~8 | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-EX-G1/2-H | G1/2″ | 5~10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-EX-G1/2 | G1/2″ | 6~12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-EX-G1/2-D | G1/2″ | 8~14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-EX-G3/4-TH | G3/4″ | 6~12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-EX-G3/4-H | G3/4″ | 8~14 | 26.44 | 8 | 23.5 | 24/30 | 18 |
| HSM-EX-G3/4 | G3/4″ | 13~18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-EX-G1 | G1″ | 18~25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-EX-G1 1/4 | G1 1/4″ | 22~32 | 41.91 | 10 | 38.5 | 50/50 | 4 |
| HSM-EX-G1 1/2 | G1 1/2" | 30~38 | 47.8 | 10 | 40 | 58/55 | 2 |
| HSM-EX-G2 | G2″ | 37~44 | 59.61 | 11 | 41 | 65/65 | 2 |
| Girêka kabloya tûncê ya bi nîkel-pêçayî ya teqemenî (Têja NPT) | |||||||
| Gotar no. | Dezî | Mezinahiya qulikê | AG | GL | H | SW1/SW2 | Packet |
| Ebat | mm | mm | mm | mm | mm | yekîneyên | |
| HSM-EX-N3/8 | NPT3/8 | 4~8 | 16.65 | 16 | 21 | 17/20 | 32 |
| HSM-EX-N1/2-H | NPT1/2″ | 5~10 | 21.85 | 20 | 22.5 | 20/23 | 32 |
| HSM-EX-N1/2 | NPT1/2″ | 6~12 | 21.85 | 20 | 23.5 | 22/23 | 32 |
| HSM-EX-N1/2-D | NPT1/2″ | 8~14 | 21.85 | 20 | 23.5 | 24/24 | 32 |
| HSM-EX-N3/4-TH | NPT3/4″ | 6~12 | 26.3 | 21 | 23.5 | 22/30 | 18 |
| HSM-EX-N3/4-H | NPT3/4″ | 8~14 | 26.3 | 21 | 23 | 24/30 | 18 |
| HSM-EX-N3/4 | NPT3/4″ | 13~18 | 26.3 | 21 | 26 | 30/30 | 18 |
| HSM-EX-N1 | NPT1″ | 18~25 | 33.15 | 26 | 33 | 40/40 | 8 |
| HSM-EX-N1 1/4 | NPT1 1/4" | 22~32 | 41.85 | 26 | 38.5 | 50/50 | 4 |
| HSM-EX-N1 1/2 | NPT1 1/2" | 30~38 | 47,75 | 27 | 40 | 58/55 | 2 |
| HSM-EX-N2 | NPT2″ | 37~44 | 59,55 | 27 | 41 | 65/65 | 2 |
